J O H N W S M I T H JR
351 Freezeland Manor Drive Linden, VA 22642
Phone 540-635-3252 Email us3[at]shentel.net
EMPLOYMENT
SAFETY ENGINEER Seva Technical Newport News,VA 2009-Current
Inspect and evaluate workplace environments, equipment, and practices, in order to ensure compliance with the Army Corps of Engineers M-385 safety standards and OSHA government regulations.
Provide sub-contractors health and safety orientations, and develop materials for these presentations. Maintain daily logs and supplement inspection records with photographs.
Review and interpret plans, blueprints, site layouts, specifications, and construction methods to ensure compliance to legal requirements and safety regulations
SAFETY OFFICER Coakley Williams Construction Gaithersburg, MD2008- 2009
Inspect and evaluate workplace environments, equipment, and practices, in order to ensure compliance with safety standards and government regulations.
Provide sub-contractors health and safety orientations, and develop materials for these presentations. Maintain daily logs and supplement inspection records with photographs.
Review and interpret plans, blueprints, site layouts, specifications, and construction methods to ensure compliance to legal requirements and safety regulations
SAFETY MANAGER Centex Construction Dulles, VA2003-2008
Use survey instruments, metering devices, tape measures, and test equipment, such as concrete strength measurers, to perform inspections.
Inspect bridges, dams, highways, buildings, wiring, plumbing, electrical circuits, sewers, heating systems, and foundations during and after construction for structural quality, general safety and conformance to specifications and codes.
Inspect and monitor construction sites to ensure adherence to safety standards, building codes, and specifications.
Measure dimensions and verify level, alignment, and elevation of structures and fixtures to ensure compliance to building plans and codes.
Issue violation notices and stop-work orders, conferring with owners, violators, and authorities to explain regulations and recommend rectifications.
Issue permits for construction, relocation, demolition and occupancy.
Approve and sign plans that meet required specifications.
Compute estimates of work completed or of needed renovations or upgrades, and approve payment for contractors.
LOSS PREVENTION MANAGER Defense Threat Reduction Center Fort Belvoir, VA
Monitoring of staff to ensure OSHA safety and compliance.
Report or review findings from accident investigations, facilities inspections, or environmental testing.
Maintain and apply knowledge of current policies, regulations, and industrial processes.
Inspect facilities, machinery, and safety equipment to identify and correct potential hazards, and to ensure safety regulation compliance.
Conduct or coordinate worker training in areas such as safety laws and regulations, hazardous condition monitoring, and use of safety equipment.
Review employee safety programs to determine their adequacy.
Interview employers and employees to obtain information about work environments and workplace incidents.
Review plans and specifications for construction of new machinery or equipment to determine whether all safety requirements have been met.
Compile, analyze, and interpret statistical data related to occupational illnesses and accidents.
Interpret safety regulations for others interested in industrial safety such as safety engineers, labor representatives, and safety inspectors.
Conduct project Orientation and Basic Safety Training for all new project employees.
Loss Prevention Inspections with written reports, including safety, health and environmental aspects of building construction. Work with Supervision to come up with practical solutions to improve project safety.
Co-instruction OSHA outreaches 10 Hour Course.
Conduct Strom Water Pollution Prevention Controls Inspections and log. Notify Supervision of findings for corrective action.
Safety & Injury Reports to U.S. Army Corps of Engineers
Other Projects:
National Research Center National Academy of Sciences
Washington, DC Journeyman Electrician Truland Systems
AOL Facility
Gainesville, VA Safety & Health Manager Truland Systems
AOL Facility
Ashburn, VA Journeyman Electrician DYNALECTRIC
USA Gannett
Tysons Corner, VA Journeyman Electrician Truland Systems
Main Terminal Expansion Dulles International airport
Herndon, VA Apprentice Electrician Truland Systems
SUMMARY
Strong ability to work cooperatively and effectively with diverse personalities
Excellent problem solving ability from the combination of safety and hands-on construction experience on large complex projects
Outstanding work ethic, willing to do what it takes to get the job done.
Good communication skills with all field employees and company personnel based on experience on the building trades
RELEVANT TRAINING
Confined Space Training: OSHA 500: First Aide/CPR Trained
Maryland Sediment & Erosion Control Green Card
EDUCATION
Shepherd College Shepardstown, WV and Catonsville Community College, Catonsville, MD
International Brotherhood of Electrical Workers (IBEW), Joint Apprenticeship Training Committee (J.A.T.C.), Electrical Trades School, Washington, DC
J O H N W S M I T H JR
351 Freezeland Manor Drive Linden, VA 22642
Phone 540-635-3252 Email us3[at]shentel.net
EMPLOYMENT
SAFETY ENGINEER Seva Technical Newport News,VA 2009-Current
Inspect and evaluate workplace environments, equipment, and practices, in order to ensure compliance with the Army Corps of Engineers M-385 safety standards and OSHA government regulations.
Provide sub-contractors health and safety orientations, and develop materials for these presentations. Maintain daily logs and supplement inspection records with photographs.
Review and interpret plans, blueprints, site layouts, specifications, and construction methods to ensure compliance to legal requirements and safety regulations
SAFETY OFFICER Coakley Williams Construction Gaithersburg, MD2008- 2009
Inspect and evaluate workplace environments, equipment, and practices, in order to ensure compliance with safety standards and government regulations.
Provide sub-contractors health and safety orientations, and develop materials for these presentations. Maintain daily logs and supplement inspection records with photographs.
Review and interpret plans, blueprints, site layouts, specifications, and construction methods to ensure compliance to legal requirements and safety regulations
SAFETY MANAGER Centex Construction Dulles, VA2003-2008
Use survey instruments, metering devices, tape measures, and test equipment, such as concrete strength measurers, to perform inspections.
Inspect bridges, dams, highways, buildings, wiring, plumbing, electrical circuits, sewers, heating systems, and foundations during and after construction for structural quality, general safety and conformance to specifications and codes.
Inspect and monitor construction sites to ensure adherence to safety standards, building codes, and specifications.
Measure dimensions and verify level, alignment, and elevation of structures and fixtures to ensure compliance to building plans and codes.
Issue violation notices and stop-work orders, conferring with owners, violators, and authorities to explain regulations and recommend rectifications.
Issue permits for construction, relocation, demolition and occupancy.
Approve and sign plans that meet required specifications.
Compute estimates of work completed or of needed renovations or upgrades, and approve payment for contractors.
LOSS PREVENTION MANAGER Defense Threat Reduction Center Fort Belvoir, VA
Monitoring of staff to ensure OSHA safety and compliance.
Report or review findings from accident investigations, facilities inspections, or environmental testing.
Maintain and apply knowledge of current policies, regulations, and industrial processes.
Inspect facilities, machinery, and safety equipment to identify and correct potential hazards, and to ensure safety regulation compliance.
Conduct or coordinate worker training in areas such as safety laws and regulations, hazardous condition monitoring, and use of safety equipment.
Review employee safety programs to determine their adequacy.
Interview employers and employees to obtain information about work environments and workplace incidents.
Review plans and specifications for construction of new machinery or equipment to determine whether all safety requirements have been met.
Compile, analyze, and interpret statistical data related to occupational illnesses and accidents.
Interpret safety regulations for others interested in industrial safety such as safety engineers, labor representatives, and safety inspectors.
Conduct project Orientation and Basic Safety Training for all new project employees.
Loss Prevention Inspections with written reports, including safety, health and environmental aspects of building construction. Work with Supervision to come up with practical solutions to improve project safety.
Co-instruction OSHA outreaches 10 Hour Course.
Conduct Strom Water Pollution Prevention Controls Inspections and log. Notify Supervision of findings for corrective action.
Safety & Injury Reports to U.S. Army Corps of Engineers
Other Projects:
National Research Center National Academy of Sciences
Washington, DC Journeyman Electrician Truland Systems
AOL Facility
Gainesville, VA Safety & Health Manager Truland Systems
AOL Facility
Ashburn, VA Journeyman Electrician DYNALECTRIC
USA Gannett
Tysons Corner, VA Journeyman Electrician Truland Systems
Main Terminal Expansion Dulles International airport
Herndon, VA Apprentice Electrician Truland Systems
SUMMARY
Strong ability to work cooperatively and effectively with diverse personalities
Excellent problem solving ability from the combination of safety and hands-on construction experience on large complex projects
Outstanding work ethic, willing to do what it takes to get the job done.
Good communication skills with all field employees and company personnel based on experience on the building trades
RELEVANT TRAINING
Confined Space Training: OSHA 500: First Aide/CPR Trained
Maryland Sediment & Erosion Control Green Card
EDUCATION
Shepherd College Shepardstown, WV and Catonsville Community College, Catonsville, MD
International Brotherhood of Electrical Workers (IBEW), Joint Apprenticeship Training Committee (J.A.T.C.), Electrical Trades School, Washington, DC
J O H N W S M I T H JR
351 Freezeland Manor Drive Linden, VA 22642
Phone 540-635-3252 Email us3[at]shentel.net
EMPLOYMENT
SAFETY ENGINEER Seva Technical Newport News,VA 2009-Current
Inspect and evaluate workplace environments, equipment, and practices, in order to ensure compliance with the Army Corps of Engineers M-385 safety standards and OSHA government regulations.
Provide sub-contractors health and safety orientations, and develop materials for these presentations. Maintain daily logs and supplement inspection records with photographs.
Review and interpret plans, blueprints, site layouts, specifications, and construction methods to ensure compliance to legal requirements and safety regulations
SAFETY OFFICER Coakley Williams Construction Gaithersburg, MD2008- 2009
Inspect and evaluate workplace environments, equipment, and practices, in order to ensure compliance with safety standards and government regulations.
Provide sub-contractors health and safety orientations, and develop materials for these presentations. Maintain daily logs and supplement inspection records with photographs.
Review and interpret plans, blueprints, site layouts, specifications, and construction methods to ensure compliance to legal requirements and safety regulations
SAFETY MANAGER Centex Construction Dulles, VA2003-2008
Use survey instruments, metering devices, tape measures, and test equipment, such as concrete strength measurers, to perform inspections.
Inspect bridges, dams, highways, buildings, wiring, plumbing, electrical circuits, sewers, heating systems, and foundations during and after construction for structural quality, general safety and conformance to specifications and codes.
Inspect and monitor construction sites to ensure adherence to safety standards, building codes, and specifications.
Measure dimensions and verify level, alignment, and elevation of structures and fixtures to ensure compliance to building plans and codes.
Issue violation notices and stop-work orders, conferring with owners, violators, and authorities to explain regulations and recommend rectifications.
Issue permits for construction, relocation, demolition and occupancy.
Approve and sign plans that meet required specifications.
Compute estimates of work completed or of needed renovations or upgrades, and approve payment for contractors.
LOSS PREVENTION MANAGER Defense Threat Reduction Center Fort Belvoir, VA
Monitoring of staff to ensure OSHA safety and compliance.
Report or review findings from accident investigations, facilities inspections, or environmental testing.
Maintain and apply knowledge of current policies, regulations, and industrial processes.
Inspect facilities, machinery, and safety equipment to identify and correct potential hazards, and to ensure safety regulation compliance.
Conduct or coordinate worker training in areas such as safety laws and regulations, hazardous condition monitoring, and use of safety equipment.
Review employee safety programs to determine their adequacy.
Interview employers and employees to obtain information about work environments and workplace incidents.
Review plans and specifications for construction of new machinery or equipment to determine whether all safety requirements have been met.
Compile, analyze, and interpret statistical data related to occupational illnesses and accidents.
Interpret safety regulations for others interested in industrial safety such as safety engineers, labor representatives, and safety inspectors.
Conduct project Orientation and Basic Safety Training for all new project employees.
Loss Prevention Inspections with written reports, including safety, health and environmental aspects of building construction. Work with Supervision to come up with practical solutions to improve project safety.
Co-instruction OSHA outreaches 10 Hour Course.
Conduct Strom Water Pollution Prevention Controls Inspections and log. Notify Supervision of findings for corrective action.
Safety & Injury Reports to U.S. Army Corps of Engineers
Other Projects:
National Research Center National Academy of Sciences
Washington, DC Journeyman Electrician Truland Systems
AOL Facility
Gainesville, VA Safety & Health Manager Truland Systems
AOL Facility
Ashburn, VA Journeyman Electrician DYNALECTRIC
USA Gannett
Tysons Corner, VA Journeyman Electrician Truland Systems
Main Terminal Expansion Dulles International airport
Herndon, VA Apprentice Electrician Truland Systems
SUMMARY
Strong ability to work cooperatively and effectively with diverse personalities
Excellent problem solving ability from the combination of safety and hands-on construction experience on large complex projects
Outstanding work ethic, willing to do what it takes to get the job done.
Good communication skills with all field employees and company personnel based on experience on the building trades
RELEVANT TRAINING
Confined Space Training: OSHA 500: First Aide/CPR Trained
Maryland Sediment & Erosion Control Green Card
EDUCATION
Shepherd College Shepardstown, WV and Catonsville Community College, Catonsville, MD
International Brotherhood of Electrical Workers (IBEW), Joint Apprenticeship Training Committee (J.A.T.C.), Electrical Trades School, Washington, DC
J O H N W S M I T H JR
351 Freezeland Manor Drive Linden, VA 22642
Phone 540-635-3252 Email us3[at]shentel.net
EMPLOYMENT
SAFETY ENGINEER Seva Technical Newport News,VA 2009-Current
Inspect and evaluate workplace environments, equipment, and practices, in order to ensure compliance with the Army Corps of Engineers M-385 safety standards and OSHA government regulations.
Provide sub-contractors health and safety orientations, and develop materials for these presentations. Maintain daily logs and supplement inspection records with photographs.
Review and interpret plans, blueprints, site layouts, specifications, and construction methods to ensure compliance to legal requirements and safety regulations
SAFETY OFFICER Coakley Williams Construction Gaithersburg, MD2008- 2009
Inspect and evaluate workplace environments, equipment, and practices, in order to ensure compliance with safety standards and government regulations.
Provide sub-contractors health and safety orientations, and develop materials for these presentations. Maintain daily logs and supplement inspection records with photographs.
Review and interpret plans, blueprints, site layouts, specifications, and construction methods to ensure compliance to legal requirements and safety regulations
SAFETY MANAGER Centex Construction Dulles, VA2003-2008
Use survey instruments, metering devices, tape measures, and test equipment, such as concrete strength measurers, to perform inspections.
Inspect bridges, dams, highways, buildings, wiring, plumbing, electrical circuits, sewers, heating systems, and foundations during and after construction for structural quality, general safety and conformance to specifications and codes.
Inspect and monitor construction sites to ensure adherence to safety standards, building codes, and specifications.
Measure dimensions and verify level, alignment, and elevation of structures and fixtures to ensure compliance to building plans and codes.
Issue violation notices and stop-work orders, conferring with owners, violators, and authorities to explain regulations and recommend rectifications.
Issue permits for construction, relocation, demolition and occupancy.
Approve and sign plans that meet required specifications.
Compute estimates of work completed or of needed renovations or upgrades, and approve payment for contractors.
LOSS PREVENTION MANAGER Defense Threat Reduction Center Fort Belvoir, VA
Monitoring of staff to ensure OSHA safety and compliance.
Report or review findings from accident investigations, facilities inspections, or environmental testing.
Maintain and apply knowledge of current policies, regulations, and industrial processes.
Inspect facilities, machinery, and safety equipment to identify and correct potential hazards, and to ensure safety regulation compliance.
Conduct or coordinate worker training in areas such as safety laws and regulations, hazardous condition monitoring, and use of safety equipment.
Review employee safety programs to determine their adequacy.
Interview employers and employees to obtain information about work environments and workplace incidents.
Review plans and specifications for construction of new machinery or equipment to determine whether all safety requirements have been met.
Compile, analyze, and interpret statistical data related to occupational illnesses and accidents.
Interpret safety regulations for others interested in industrial safety such as safety engineers, labor representatives, and safety inspectors.
Conduct project Orientation and Basic Safety Training for all new project employees.
Loss Prevention Inspections with written reports, including safety, health and environmental aspects of building construction. Work with Supervision to come up with practical solutions to improve project safety.
Co-instruction OSHA outreaches 10 Hour Course.
Conduct Strom Water Pollution Prevention Controls Inspections and log. Notify Supervision of findings for corrective action.
Safety & Injury Reports to U.S. Army Corps of Engineers
Other Projects:
National Research Center National Academy of Sciences
Washington, DC Journeyman Electrician Truland Systems
AOL Facility
Gainesville, VA Safety & Health Manager Truland Systems
AOL Facility
Ashburn, VA Journeyman Electrician DYNALECTRIC
USA Gannett
Tysons Corner, VA Journeyman Electrician Truland Systems
Main Terminal Expansion Dulles International airport
Herndon, VA Apprentice Electrician Truland Systems
SUMMARY
Strong ability to work cooperatively and effectively with diverse personalities
Excellent problem solving ability from the combination of safety and hands-on construction experience on large complex projects
Outstanding work ethic, willing to do what it takes to get the job done.
Good communication skills with all field employees and company personnel based on experience on the building trades
RELEVANT TRAINING
Confined Space Training: OSHA 500: First Aide/CPR Trained
Maryland Sediment & Erosion Control Green Card
EDUCATION
Shepherd College Shepardstown, WV and Catonsville Community College, Catonsville, MD
International Brotherhood of Electrical Workers (IBEW), Joint Apprenticeship Training Committee (J.A.T.C.), Electrical Trades School, Washington, DC
J O H N W S M I T H JR
351 Freezeland Manor Drive Linden, VA 22642
Phone 540-635-3252 Email us3[at]shentel.net
EMPLOYMENT
SAFETY ENGINEER Seva Technical Newport News,VA 2009-Current
Inspect and evaluate workplace environments, equipment, and practices, in order to ensure compliance with the Army Corps of Engineers M-385 safety standards and OSHA government regulations.
Provide sub-contractors health and safety orientations, and develop materials for these presentations. Maintain daily logs and supplement inspection records with photographs.
Review and interpret plans, blueprints, site layouts, specifications, and construction methods to ensure compliance to legal requirements and safety regulations
SAFETY OFFICER Coakley Williams Construction Gaithersburg, MD2008- 2009
Inspect and evaluate workplace environments, equipment, and practices, in order to ensure compliance with safety standards and government regulations.
Provide sub-contractors health and safety orientations, and develop materials for these presentations. Maintain daily logs and supplement inspection records with photographs.
Review and interpret plans, blueprints, site layouts, specifications, and construction methods to ensure compliance to legal requirements and safety regulations
SAFETY MANAGER Centex Construction Dulles, VA2003-2008
Use survey instruments, metering devices, tape measures, and test equipment, such as concrete strength measurers, to perform inspections.
Inspect bridges, dams, highways, buildings, wiring, plumbing, electrical circuits, sewers, heating systems, and foundations during and after construction for structural quality, general safety and conformance to specifications and codes.
Inspect and monitor construction sites to ensure adherence to safety standards, building codes, and specifications.
Measure dimensions and verify level, alignment, and elevation of structures and fixtures to ensure compliance to building plans and codes.
Issue violation notices and stop-work orders, conferring with owners, violators, and authorities to explain regulations and recommend rectifications.
Issue permits for construction, relocation, demolition and occupancy.
Approve and sign plans that meet required specifications.
Compute estimates of work completed or of needed renovations or upgrades, and approve payment for contractors.
LOSS PREVENTION MANAGER Defense Threat Reduction Center Fort Belvoir, VA
Monitoring of staff to ensure OSHA safety and compliance.
Report or review findings from accident investigations, facilities inspections, or environmental testing.
Maintain and apply knowledge of current policies, regulations, and industrial processes.
Inspect facilities, machinery, and safety equipment to identify and correct potential hazards, and to ensure safety regulation compliance.
Conduct or coordinate worker training in areas such as safety laws and regulations, hazardous condition monitoring, and use of safety equipment.
Review employee safety programs to determine their adequacy.
Interview employers and employees to obtain information about work environments and workplace incidents.
Review plans and specifications for construction of new machinery or equipment to determine whether all safety requirements have been met.
Compile, analyze, and interpret statistical data related to occupational illnesses and accidents.
Interpret safety regulations for others interested in industrial safety such as safety engineers, labor representatives, and safety inspectors.
Conduct project Orientation and Basic Safety Training for all new project employees.
Loss Prevention Inspections with written reports, including safety, health and environmental aspects of building construction. Work with Supervision to come up with practical solutions to improve project safety.
Co-instruction OSHA outreaches 10 Hour Course.
Conduct Strom Water Pollution Prevention Controls Inspections and log. Notify Supervision of findings for corrective action.
Safety & Injury Reports to U.S. Army Corps of Engineers
Other Projects:
National Research Center National Academy of Sciences
Washington, DC Journeyman Electrician Truland Systems
AOL Facility
Gainesville, VA Safety & Health Manager Truland Systems
AOL Facility
Ashburn, VA Journeyman Electrician DYNALECTRIC
USA Gannett
Tysons Corner, VA Journeyman Electrician Truland Systems
Main Terminal Expansion Dulles International airport
Herndon, VA Apprentice Electrician Truland Systems
SUMMARY
Strong ability to work cooperatively and effectively with diverse personalities
Excellent problem solving ability from the combination of safety and hands-on construction experience on large complex projects
Outstanding work ethic, willing to do what it takes to get the job done.
Good communication skills with all field employees and company personnel based on experience on the building trades
RELEVANT TRAINING
Confined Space Training: OSHA 500: First Aide/CPR Trained
Maryland Sediment & Erosion Control Green Card
EDUCATION
Shepherd College Shepardstown, WV and Catonsville Community College, Catonsville, MD
International Brotherhood of Electrical Workers (IBEW), Joint Apprenticeship Training Committee (J.A.T.C.), Electrical Trades School, Washington, DC
|
