Mobile: 337-540-0175
Alternate: 979-814-1233
E-mail: tobyjlandry[at]yahoo.com
2205 Palermo Dr.
Sulphur, LA. 70663
Toby Landry
ObjectiveSeeking a technical position to further my career and experience. At the same time proving to be a valuable asset to my employer, thus being considered for advancement as the opportunity may arise.
Summary of qualificationsWorked in various industrial settings; Management, in-house maintenance, contract construction, nuclear, petrochemical, power plant, custody metering, Plastics, food grade processing, Pharmaceutical and rubber production for the last fifteen years.
I&E Planning Experience
Scheduling experience with Primavera 3.0 and Primavera 6.0
Foundation Fieldbus startup and commissioning
Badged unescorted nuclear clearance / AOV tester / I&C tech
Calibrate Rosemount, Honeywell, Foxboro, Yokogawa, & ABB smart transmitters. (HART, Honeywell, Foxboro and Yokagawa Communicators)
Basic Analyzer Experience (PH, continuity, opacity, consistency, & density)
Repair and calibrate numerous control valves along with the Field Vue Smart positioner. Have used various valve validation software.
Experienced with four types of control systems: ABB DCS, Honeywell TDC 3000, Rosemount Delta V, & Moore Apex.
Good working knowledge of I/E P&IDs, loop, and location drawings.
Able to troubleshoot and maintain instruments and electrical within an operating plant.
Instrument and Electrical QA/QC inspector (Validation) Quality assurance
Experience with Fire-eye burner control systems.
Able to install instrumentation and electrical according to ISA, NEC, Spec.
Experienced with Weigh Tronix scales.
Micro Motion, Vortex meters, Turbin Meters, DP Cells and Radar Levels.
I/E Job Planning Software (ABS)
Over 15+ years of experience in the instrumentation field.
EducationTepco: Primavera P6 Project scheduling software training
Associate Degree: Industrial Instrumentation and Electronics, Louisiana Technical College Sowela Campus
1985-1989 High School Diploma, St Louis Catholic High School
Professional experience1.Jan/08Dec/08 I/E Construction Assurance Universal Personnel Motiva
Representing the interest of the client, in the aspect of quality inspection and assurance of materials as contractors perform installation. Working in conjunction with contractor quality inspection personnel, advising them on what is acceptable and what is not. Enforcing clients practices of build it tight and build it clean. Taking active part in all commissioning activities as they happen from observing the DCS to verifying field testing of the instrument.
2.Aug/07November/07 Instrument and Electrical Scheduler PTS BASF
Scheduling job work task and the inner workings of each task, in the order in which it needs to happen. Tracking the steps of jobs as they go out, and informing the client of any road blocks that may arise. Utilized P3 software
3.March/07 July/07 I&E Supervisor Foster Wheeler Exxon Mobile
Coordinating between the electrical contractor, and other crafts on a Coker expansion / turnaround. Responsible for final I&E inspection. Approving all Instrument personnel for the contractor to help guarantee quality technicians. Working hand in hand with Exxon Mobile representatives to commission all SIS Systems. Revising loop and electrical drawings as changes arise.
4.August/05- Feb./07 Instrument Inspector Universal Personnel Valero
Perform I&E inspection as a start up team for Valero. Go between the facilities in Lima, Memphis and Port Author. Completed Sulphur Recovery Project, GDU project, Sour water stripper, Tail Gas Treater, all Diesel Hydro Treaters that came on line for 2006 at all three locations. Presently commissioning a crude unit to come on line in the beginning of 2007
5.July/05 August/05 Instrument Inspector ISC Carbon Black
.Worked with the instrument techs to get the facility back up and running as quickly and safely as possible, after being shut down for a few years. Walked down every piece of instrumentation on the job, kept a record of what had to go back as new and what could be salvaged. Lent a helping hand in calibrating.
6.March/05 May/05 I&C Tech The Atlantic Group, Wolf Creek
Worked to support all activities of Wolf Creek I&C maintenance.
7.February/05- March/05 I&C / AOV Tech. Crane Nuclear, STP
Went through two weeks of training to qualify for I&C certification. Working as an AOV tester. Taking part in Valve calibration (bench set / positioner / I/P calibration), determinations, entire system walk downs, installation of new equipment per standards set. Working with STP I&C on a daily basis.
8.January/05-February/05 Startup Instrument tech, AEI, Valero Refinery
Troubleshot loops and ran the DCS board utilizing Foxboro I/A. Calibrated valves and transmitters. Changed out old and installed new control devices for expansion project. Stayed on for start-up.
9.July/04- January/05 Startup Instrument tech, Englobal, Basell
Taking part as Lead Instrument tech to bring up an existing process that was abandoned in place for two years. Working in conjunction with operations on a daily basis, loop checking and trouble shooting problems
10.March/04- May/04 Startup Instrument tech, H. B. Zachry, Equistar
Took part in a plant wide shutdown, installed new instrumentation, re-worked old control schemes, performed pre-startup system checks, and selected as one of four out of 25 to remain for startup working alongside in-house instrumentation.
11.April/03- March/04 Instrument tech, MKD Electric, Corn Products
Taking responsibility for all Instrumentation aspects from a maintenance perspective. On a daily basis deal with PH, continuity, opacity, consistency, density, flow, level, temperature, pressure, and routine maintenance of control valves. Utilize trouble-shooting experience to keep process up and running.
12.Jan/ 03- Mar/03 Instrument Tech, Fluor, Chevron Clean Fuels Project
Working as lead instrument tech. Taking part in a revamp of entire process throughout the Chevron facility. Active part in daily turnover meetings with company representatives. Given responsibility over instrumentation activities as they happen on the night shift. Taking active part in calibration, pre-loop, and loop sales to the client.
13.Dec/02- Jan/ 03 I&E Supervisor, Citgo (Priority Staffing)
Take part in plant-wide start up. Supervise the completion of work in all areas, after start up stayed 2 weeks to help with the upcoming holidays. Further information on work history available upon request.