RESUME
ANACLETO CAYA CORTEZ
4214 Valley forge Rd., Chesterfields Apt. D
Mt. Vernon, IL. 62864, USA
Res. 618-2441098/ Cell Ph. 618-2314936
Email: clefecor[at]yahoo.com
POSITION APPLIED FOR: Commercial Electrician
PROFESSIONAL PROFILE:
Experienced in Electrical Construction, Installation activities, of a High Voltage GIS Substations, and Large Power plant project. Experienced in the construction and design of a high rise and commercial building project. Twelve solid years experienced in the construction projects.
Experienced in the operation and maintenance for 11 years of a large power plant, high voltage substations, Oil and Gas refinery and petrochemical plant.
Can manage the project to a day to day work schedule activities and familiar with International management. Always adhere to company policies and familiar with ISO : 9002, IS:14002
Highly motivated individual, effective personable team player and goal driven and dedicated to work, excellent interpersonal skills and computer Literate.
Direct report to the Project Manager and / or to Erection Manager to submit reports and to received further instruction and follow the work program of the management.
OHSA 30 hour Occupational Safety and Health Training Course in Construction Safety Health.
PROFESSIONAL ACHIEVEMENTS:
March 07 to date National Railway Equipment Co., Mount Vernon, IL., 62864, USA
Position: Electrical Technician- Locomotive
Location: 1100 Shawnee Rd., Mount Vernon, IL.
Duties: To install and cable termination of all electrical components related to locomotive are Gen-sets, Inverter, Compressor, Blower, UPS, Airbrake, Choppers, Contactor, Bus bar, Battery cell and Traction motor. Installation and wiring of Lighting, E-bell, Horn, fuel gauge, fuel cut out, blow down, air conditioning, and other related electrical components. Lay down of power and control cable and termination, lay down two to three board, MU wire, MU to five board, Testing and high pot test.
Responsibility: To ensure that all electrical components are properly installed to the highest possible to the electrical standard.
April 06 to Nov.06 DANWAY Electrical & Mechanical Engineering Co., Dubai, UAE
Position: Project Engineer- Electrical
Location: 132KV GIS Substation-Dubai, UAE
Duties: Designed and Estimate the cable routing of power and control cable and termination accessories. Designed and estimate the cable ladder layout. Supervised the installation of earthing Grid conductor and internal earthing conductor network; erection of (3) three 500 MVA earthing transformer, erection of (3) three capacitor bank and cable termination, lay-down of power and control cable, installation of lighting and small power, installation of lightning protection of the substation. Manage and control jobsite the staffing and cost labor contract, equipments, materials and services. Implement
Safety programs and monitor ISO standards.
Responsibility: Direct report to the Operation Manager/ Project Manager the progress and the work program.
Aug. 05 to Mar. 06 AREVA (ALSTOM) Transmission & Distribution, Dubai, UAE
Position: Erection Supervisor -Electrical
Location: 400/220KV GIS Substation- Sharjah, UAE
Duties: Supervised the installation of 400KV and 220KV, GIS Substation; Gas Insulated Switchgear (GIS), Gas Insulated Bus Bar(GIB), Current Transformer (CT), Voltage Transformer (VT), and Monitoring devices; Installation of relay panel, Substation Control Monitoring System (SCMS), Fault Monitoring System (FMS), Interface Panel, Telecommunication, Low Voltage AC (LVAC), Uninterruptible Power Supply (UPS), installation of Battery charger, refilling of water solution and charging 110 and 48volts battery; Installation of cable tray, Lay-down of power and and control cable, testing of power cable, cable glanding, dressing and termination of power and control cable; Installation of earthing both internal and external network, installation of transformer. Installation of surge arrester, and bushing for 400KV and 200KV and overhead line tower. Control jobsite, contract labor, equipments materials and services and ensure that project operations are within budget. Strict implementation of safety program.
Responsibility: Always report to Project Manager and / or Erection Manager and support the Work Program of the Management.
Mar.01 to Jul.05 TARGET ENGG CONST. ME & I DIVISION, Abu-Dhabi, UAE
Projects Undertaken: As Construction Site Supervisor for GIS Substations
1. Worked to the Project 400KV and 132 KV S/S, E48, ADWEA/ TOSHIBA TMT and D, Abu-Dhabi, U.A.E.
2. Worked to the project 400/220/ 33/ 11KV S/S, Al ain South West, ADWEA,VATECH, Abu-dhabi, UAE
3. Worked to the project SVC 220KV S/S Al-ain, South West, ADWEA/ TOSHIBA TPK, Abu-Dhabi, U.A.E.
4. Worked to the project Mussafah Palace (Private Department), Abu-dhabi, UAE
5. Worked to the project Guzhlan Island Palace (Private Department), Abu-dhabi, UAE
6. Worked to the project Globe-19 Rest house (private Department) Dubai, UAE
7. Worked to the project 132/33/11KV S/S Conference Palace, ADWEA/ VATECH, Abu-dhabi, UAE
8. Worked to the project 400KV S/S Al Taweelah, ADWEA/ HTACHI SUMITOMO, Abu-dhabi, UAE
Duties: Supervised the installation of 400KV, 220KV, 132KV, 33KV, and 11KV Grid station; Gas Insulated Switchgear (GIS), Gas Insulated Bus Bar, Current Transformer (CT), Voltage Transformer (VT), and Monitoring devices; Installation of relay panel, Substation Control Monitoring System (SCMS), Fault Monitoring System (FMS), Interface Panel, Telecom, Low Voltage AC (LVAC), Uninterruptible Power Supply (UPS), installation of Battery racks, refilling of water solution and charging 110 and 48volts DC; Installation of cable tray, Lay-down of power and control cable, testing of power cable, dressing and termination of power and control cable; Installation of earthing both internal and external network, installation of transformer accessories, vacuuming of transformer, oil filtering and oil filling, Installation of surge arrester and transformer. Supervised the Installation of 2 units 220KV Static Voltage Compensator (SVC), Substation and 4 units Reactor and. Control jobsite, coordinated project schedule, contract labor, staffing, equipments, materials and services. Always adhere to contract and technical specification to the highest electrical standard practice and always turnover project on time; reviewed and coordinated for the approval of project to be implemented.
Responsibility: Always report to Project Manager and / or Erection Manager and support the Work Program of the Management.
Nov.99 to Feb. 01 ABB SADILMI S.P.A. (ALSTOM), Abu Dhabi, U. A. E.
Position: Commissioning Supervisor - Electrical
Location: General Utilities Expansion Project, (ADNOC) Ruwais
Duties: Supervised for the following activities, taking the insulation resistance of the power cable of 33kv and 11kv and conducting high pot test including bus bar. Testing and commissioning of Switchgear and breaker, testing various alarms and trips of a transformer such as Tap-changer, oil pressure, differential transformer protection, bucholtz tank trip, Excess temperature oil trip, excess temperature wind trip and tank pressure relief device. Responsible of taking the current transformer (CT) polarity and CT ratio, of taking relay setting ,of taking the phase sequence and of wire loop checking and metering devices. Responsible of electrical modification, battery charging and discharging.
Responsibilities: responsible in carrying out all electrical construction controls and checks in respect to the implementation of electrical standard procedure.
May92 to Nov.99 KUNAIBY ENGINEERING SERVICES, Abu-Dhabi, U.A.E.
Worked with :
ANSALDO ENERGIA SPA, Abu-Dhabi, U.A.E.
ABB HASELSCROFT, Abu-Dhabi, U.A.E.
BABCOCK DEUCHE , Abu-Dhabi, U.A.E.
ADWEA , Abu-Dhabi, UAE
Position: Maintenance Foreman-Electrical
Location: Abu-Dhabi Water and Electricity Power Plant with Desalination
Duties-Supervised the overhauling, Operation and Maintenance of Gas and Steam Turbines, Boilers Desalination, Pumps, Motors, Transformers, MCC, Relay and UPS. Overhauling of the 4units 165MW gas turbine and 10units 65 MW Steam Turbine. Isolated power supply to the whole system of metering and protection devices during the shutdown. Checking carbon brushes of 165MW Generator and Exciter of and switchgears . Worked with ADWEA Engineer in Operation and Maintenance, trouble shooting of protective devices and relays of gas and steam Turbine, boiler, motor, transformer, motor operated valve and other related equipments. Testing of protection systems of power station and power transmission System. Maintenance of high voltage switching equipments, circuit breakers, Distribution board, transformers and modules. Preventive maintenance of all Electrical equipments, assembly and disassembly of motor and bearing replacement, and re-greasing of motors. Supervised the seventy eight staff with different skill, electrical, mechanical and instrumentation technician.
Responsibilities: To ensure that all electrical installation activities shall conform to the electrical standard and carry out all electrical preventive and predictive maintenance as per electrical specification.
Aug.1988-Aug. 1990 KELLOGG PLANT SERVICES, FAHAHEEL, Kuwait
Position: Maintenance Technician- Electrical
Location: Mina Abdullah Refinery, Kuwait
Duties-To carry out testing and commissioning activities of newly build refinery cooker train 1and train 2 preventive and predictive breakdown maintenance in all industrial electrical machine within the area. Includes 25 tons monorail hoist, 32 units motorize operated valves (MOV) and 4 units 3.3 KV high tension motor and 120 units 440V motors, air drier, vacuum pumps, booster pump, transformers, emergency generator, switchgears, transformer, breakers of motor control center (MCC), un-interruptible power supply (UPS) periodic reading on battery. Calibration of system protection and metering devices. Trouble shooting on switchgear, loop checking of lighting and power supply. Safety strictly observed during shutdown and on plant operation and maintenance may it be hot work or cold work.
Responsibilities: To ensure that all electrical installation activities shall conform to the technical specification and contract documents.
Nov.1985-Jul.1988 L.C. CORTEZ CONSTRUCTION, Philippines
Position: Site Engineer
Location: Bicol Region
Duties: Managing and preparation of project man-hours estimates, project study, project proposals, design scope of work, construction scope of work, tender documents, project activities and schedules required on various projects. Knowledge of computer being utilized for various projects for management, Engineering calculation, Projects support activities. Supervised construction project of commercial buildings, like Bank, Hospital, High rise buildings, Schools and industrial buildings. Designed and estimates electrical power of the buildings according to specification. Supervision of electrical installation, includes from service drop to service entrance of the building. Layout of rigid conduit, surface raceways, wire-ways, bush-ways, power outlet, junction boxes, switches, fittings, switchboards and panel boards. Supervised installations of fire alarm s, smoke and gas detector and other electrical devices.
Responsibilities- To ensure that all electrical activities conform to the technical specification and to contract documents.
Sept. 1978-Oct. 1979 ERECTORS CONSTRUCTION INC., Philippines
Position: Lead man- Building Electrician
Location: Buraida Sports Complex Project ( Saudi Arabia )
Duties: Installation of rigid steel conduits, power outlets, switches, junction boxes and fittings. Lay-down of power cable from transformer from substation to primary supply which is 4 units, 11 KV transformer. Termination of service drop and also the service entrance. Installation of smoke detector, lighting fixture, power system outlet and other electrical equipments.
Responsibilities: to ensure that all electrical installation are in the right place.
Dec.1973-Sept.1978 PETROCHEMICAL PRODUCTS INC., Philippines
Position: Maintenance Lead man - Electrician
Location: Rosario, Cavite
Duties: To carry out the preventive and predictive maintenance of all electrical equipments. Switchgear commissioning, disassembly and re-assembly of circuit breaker, contactors and relays, termination of cable and testing of power supply for motor. Overhauling of motor, removal and replacement of bearing and checking winding continuity before assembly, troubleshoot lighting and power supply fault finding. In-charge of various utilities equipments such as steam boiler, heater, air compressor, air dryer, cooling tower system, water facilities such as softener and demineralizer, and chiller Hydraulic pump, pelletizer, screener, blower, rubber grinder, booster pump, injection and centrifugal pump. Maintaining substation, control panel, fire alarm system, one emergency generating unit. In-charge in trouble shooting of instrument devices like temperature gauge, pressure gauge, pressure transmitter, level transmitter, level transmitter indicator, level controller, flow recorder transmitter, panel indicator, pneumatic valve.
Responsibilities: To ensure normal operating procedure of all equipments and to avoid downtime of production.
Skills Preview:Knowledgeable in MS Word, Excel, Data base and Power point.
Studies Conducted:
October 1999Internal Quality Auditor Training Course (Management)
Joint Accreditation Society of Australia & New Zealand
(JAS-ANZ) Abu-Dhabi, UAE
August 1998PC Assembly, Troubleshooting, Upgrading and Configuration
Galaxy Computer, Abu-dhabi, UAE
October 1991Programmable Logic Controllers (PLC)
Industrial Controls-72 Hrs.
Meralco Foundation Institute, Manila, Philippines
June 1988Electrical System Design
United Professional Review Center, Manila, Philippines
Seminars Attended:
November 2008 OSHA 30 Hour Construction Certificate SN. 2352774
November 2006Enabling Certificate UTE C18-510 05, AREVA T & D
AREVA T & D, Dhaid, Sharjah, UAE
August 2001Safety Training, ABB (GUP Project)
Ruwais Refinery, Abu-dhabi, UAE
February 1998Basic Automotive Fundamentals
Abu-dhabi, UAE
September 1991Personal Enhancement Seminar
Entrepreneural Appreciation, Philippines
May 1985Commercial and Technical Policies and Services
Manila Electric Company, (Meralco) , Philippines
August 1977Industrial Fire Brigade Training,1977
Philippine Fire Protection Association, Philippines
December 1976Fire Fighting Technique, 1976
Petrochem Fire Bregades, Philippines
Educational Achievements:
1980-1985 (College): Bachelor of Science in Electrical Engineering (BSEE Graduated)
FEATI UNIVERSITY
Sta. Cruz, Manila, Philippines
References:
1. Mr. Mike Oliver National Railway Equipment Co., Mount Vernon, IL. USA
Electrical Supervisor Tel.(618)2426590
2. Engr. Arturo Tolentino Danway Mechanical and Electrical Engineering Co., Dubai, UAE
Project Manager Tell. +97104-2620356
3.Mr. Herve Venture AREVA T & D, Dubai, UAE
Site Manager Tell. +97104-33633084
STATUS : Green Card Holder allowed to work anywhere with Valid
Driver Licensed.
Respectfully Submitted:
Anacleto C. Cortez
RESUME
ANACLETO CAYA CORTEZ
4214 Valley forge Rd., Chesterfields Apt. D
Mt. Vernon, IL. 62864, USA
Res. 618-2441098/ Cell Ph. 618-2314936
Email: clefecor[at]yahoo.com
POSITION APPLIED FOR: Commercial Electrician
PROFESSIONAL PROFILE:
Experienced in Electrical Construction, Installation activities, of a High Voltage GIS Substations, and Large Power plant project. Experienced in the construction and design of a high rise and commercial building project. Twelve solid years experienced in the construction projects.
Experienced in the operation and maintenance for 11 years of a large power plant, high voltage substations, Oil and Gas refinery and petrochemical plant.
Can manage the project to a day to day work schedule activities and familiar with International management. Always adhere to company policies and familiar with ISO : 9002, IS:14002
Highly motivated individual, effective personable team player and goal driven and dedicated to work, excellent interpersonal skills and computer Literate.
Direct report to the Project Manager and / or to Erection Manager to submit reports and to received further instruction and follow the work program of the management.
OHSA 30 hour Occupational Safety and Health Training Course in Construction Safety Health.
PROFESSIONAL ACHIEVEMENTS:
March 07 to date National Railway Equipment Co., Mount Vernon, IL., 62864, USA
Position: Electrical Technician- Locomotive
Location: 1100 Shawnee Rd., Mount Vernon, IL.
Duties: To install and cable termination of all electrical components related to locomotive are Gen-sets, Inverter, Compressor, Blower, UPS, Airbrake, Choppers, Contactor, Bus bar, Battery cell and Traction motor. Installation and wiring of Lighting, E-bell, Horn, fuel gauge, fuel cut out, blow down, air conditioning, and other related electrical components. Lay down of power and control cable and termination, lay down two to three board, MU wire, MU to five board, Testing and high pot test.
Responsibility: To ensure that all electrical components are properly installed to the highest possible to the electrical standard.
April 06 to Nov.06 DANWAY Electrical & Mechanical Engineering Co., Dubai, UAE
Position: Project Engineer- Electrical
Location: 132KV GIS Substation-Dubai, UAE
Duties: Designed and Estimate the cable routing of power and control cable and termination accessories. Designed and estimate the cable ladder layout. Supervised the installation of earthing Grid conductor and internal earthing conductor network; erection of (3) three 500 MVA earthing transformer, erection of (3) three capacitor bank and cable termination, lay-down of power and control cable, installation of lighting and small power, installation of lightning protection of the substation. Manage and control jobsite the staffing and cost labor contract, equipments, materials and services. Implement
Safety programs and monitor ISO standards.
Responsibility: Direct report to the Operation Manager/ Project Manager the progress and the work program.
Aug. 05 to Mar. 06 AREVA (ALSTOM) Transmission & Distribution, Dubai, UAE
Position: Erection Supervisor -Electrical
Location: 400/220KV GIS Substation- Sharjah, UAE
Duties: Supervised the installation of 400KV and 220KV, GIS Substation; Gas Insulated Switchgear (GIS), Gas Insulated Bus Bar(GIB), Current Transformer (CT), Voltage Transformer (VT), and Monitoring devices; Installation of relay panel, Substation Control Monitoring System (SCMS), Fault Monitoring System (FMS), Interface Panel, Telecommunication, Low Voltage AC (LVAC), Uninterruptible Power Supply (UPS), installation of Battery charger, refilling of water solution and charging 110 and 48volts battery; Installation of cable tray, Lay-down of power and and control cable, testing of power cable, cable glanding, dressing and termination of power and control cable; Installation of earthing both internal and external network, installation of transformer. Installation of surge arrester, and bushing for 400KV and 200KV and overhead line tower. Control jobsite, contract labor, equipments materials and services and ensure that project operations are within budget. Strict implementation of safety program.
Responsibility: Always report to Project Manager and / or Erection Manager and support the Work Program of the Management.
Mar.01 to Jul.05 TARGET ENGG CONST. ME & I DIVISION, Abu-Dhabi, UAE
Projects Undertaken: As Construction Site Supervisor for GIS Substations
1. Worked to the Project 400KV and 132 KV S/S, E48, ADWEA/ TOSHIBA TMT and D, Abu-Dhabi, U.A.E.
2. Worked to the project 400/220/ 33/ 11KV S/S, Al ain South West, ADWEA,VATECH, Abu-dhabi, UAE
3. Worked to the project SVC 220KV S/S Al-ain, South West, ADWEA/ TOSHIBA TPK, Abu-Dhabi, U.A.E.
4. Worked to the project Mussafah Palace (Private Department), Abu-dhabi, UAE
5. Worked to the project Guzhlan Island Palace (Private Department), Abu-dhabi, UAE
6. Worked to the project Globe-19 Rest house (private Department) Dubai, UAE
7. Worked to the project 132/33/11KV S/S Conference Palace, ADWEA/ VATECH, Abu-dhabi, UAE
8. Worked to the project 400KV S/S Al Taweelah, ADWEA/ HTACHI SUMITOMO, Abu-dhabi, UAE
Duties: Supervised the installation of 400KV, 220KV, 132KV, 33KV, and 11KV Grid station; Gas Insulated Switchgear (GIS), Gas Insulated Bus Bar, Current Transformer (CT), Voltage Transformer (VT), and Monitoring devices; Installation of relay panel, Substation Control Monitoring System (SCMS), Fault Monitoring System (FMS), Interface Panel, Telecom, Low Voltage AC (LVAC), Uninterruptible Power Supply (UPS), installation of Battery racks, refilling of water solution and charging 110 and 48volts DC; Installation of cable tray, Lay-down of power and control cable, testing of power cable, dressing and termination of power and control cable; Installation of earthing both internal and external network, installation of transformer accessories, vacuuming of transformer, oil filtering and oil filling, Installation of surge arrester and transformer. Supervised the Installation of 2 units 220KV Static Voltage Compensator (SVC), Substation and 4 units Reactor and. Control jobsite, coordinated project schedule, contract labor, staffing, equipments, materials and services. Always adhere to contract and technical specification to the highest electrical standard practice and always turnover project on time; reviewed and coordinated for the approval of project to be implemented.
Responsibility: Always report to Project Manager and / or Erection Manager and support the Work Program of the Management.
Nov.99 to Feb. 01 ABB SADILMI S.P.A. (ALSTOM), Abu Dhabi, U. A. E.
Position: Commissioning Supervisor - Electrical
Location: General Utilities Expansion Project, (ADNOC) Ruwais
Duties: Supervised for the following activities, taking the insulation resistance of the power cable of 33kv and 11kv and conducting high pot test including bus bar. Testing and commissioning of Switchgear and breaker, testing various alarms and trips of a transformer such as Tap-changer, oil pressure, differential transformer protection, bucholtz tank trip, Excess temperature oil trip, excess temperature wind trip and tank pressure relief device. Responsible of taking the current transformer (CT) polarity and CT ratio, of taking relay setting ,of taking the phase sequence and of wire loop checking and metering devices. Responsible of electrical modification, battery charging and discharging.
Responsibilities: responsible in carrying out all electrical construction controls and checks in respect to the implementation of electrical standard procedure.
May92 to Nov.99 KUNAIBY ENGINEERING SERVICES, Abu-Dhabi, U.A.E.
Worked with :
ANSALDO ENERGIA SPA, Abu-Dhabi, U.A.E.
ABB HASELSCROFT, Abu-Dhabi, U.A.E.
BABCOCK DEUCHE , Abu-Dhabi, U.A.E.
ADWEA , Abu-Dhabi, UAE
Position: Maintenance Foreman-Electrical
Location: Abu-Dhabi Water and Electricity Power Plant with Desalination
Duties-Supervised the overhauling, Operation and Maintenance of Gas and Steam Turbines, Boilers Desalination, Pumps, Motors, Transformers, MCC, Relay and UPS. Overhauling of the 4units 165MW gas turbine and 10units 65 MW Steam Turbine. Isolated power supply to the whole system of metering and protection devices during the shutdown. Checking carbon brushes of 165MW Generator and Exciter of and switchgears . Worked with ADWEA Engineer in Operation and Maintenance, trouble shooting of protective devices and relays of gas and steam Turbine, boiler, motor, transformer, motor operated valve and other related equipments. Testing of protection systems of power station and power transmission System. Maintenance of high voltage switching equipments, circuit breakers, Distribution board, transformers and modules. Preventive maintenance of all Electrical equipments, assembly and disassembly of motor and bearing replacement, and re-greasing of motors. Supervised the seventy eight staff with different skill, electrical, mechanical and instrumentation technician.
Responsibilities: To ensure that all electrical installation activities shall conform to the electrical standard and carry out all electrical preventive and predictive maintenance as per electrical specification.
Aug.1988-Aug. 1990 KELLOGG PLANT SERVICES, FAHAHEEL, Kuwait
Position: Maintenance Technician- Electrical
Location: Mina Abdullah Refinery, Kuwait
Duties-To carry out testing and commissioning activities of newly build refinery cooker train 1and train 2 preventive and predictive breakdown maintenance in all industrial electrical machine within the area. Includes 25 tons monorail hoist, 32 units motorize operated valves (MOV) and 4 units 3.3 KV high tension motor and 120 units 440V motors, air drier, vacuum pumps, booster pump, transformers, emergency generator, switchgears, transformer, breakers of motor control center (MCC), un-interruptible power supply (UPS) periodic reading on battery. Calibration of system protection and metering devices. Trouble shooting on switchgear, loop checking of lighting and power supply. Safety strictly observed during shutdown and on plant operation and maintenance may it be hot work or cold work.
Responsibilities: To ensure that all electrical installation activities shall conform to the technical specification and contract documents.
Nov.1985-Jul.1988 L.C. CORTEZ CONSTRUCTION, Philippines
Position: Site Engineer
Location: Bicol Region
Duties: Managing and preparation of project man-hours estimates, project study, project proposals, design scope of work, construction scope of work, tender documents, project activities and schedules required on various projects. Knowledge of computer being utilized for various projects for management, Engineering calculation, Projects support activities. Supervised construction project of commercial buildings, like Bank, Hospital, High rise buildings, Schools and industrial buildings. Designed and estimates electrical power of the buildings according to specification. Supervision of electrical installation, includes from service drop to service entrance of the building. Layout of rigid conduit, surface raceways, wire-ways, bush-ways, power outlet, junction boxes, switches, fittings, switchboards and panel boards. Supervised installations of fire alarm s, smoke and gas detector and other electrical devices.
Responsibilities- To ensure that all electrical activities conform to the technical specification and to contract documents.
Sept. 1978-Oct. 1979 ERECTORS CONSTRUCTION INC., Philippines
Position: Lead man- Building Electrician
Location: Buraida Sports Complex Project ( Saudi Arabia )
Duties: Installation of rigid steel conduits, power outlets, switches, junction boxes and fittings. Lay-down of power cable from transformer from substation to primary supply which is 4 units, 11 KV transformer. Termination of service drop and also the service entrance. Installation of smoke detector, lighting fixture, power system outlet and other electrical equipments.
Responsibilities: to ensure that all electrical installation are in the right place.
Dec.1973-Sept.1978 PETROCHEMICAL PRODUCTS INC., Philippines
Position: Maintenance Lead man - Electrician
Location: Rosario, Cavite
Duties: To carry out the preventive and predictive maintenance of all electrical equipments. Switchgear commissioning, disassembly and re-assembly of circuit breaker, contactors and relays, termination of cable and testing of power supply for motor. Overhauling of motor, removal and replacement of bearing and checking winding continuity before assembly, troubleshoot lighting and power supply fault finding. In-charge of various utilities equipments such as steam boiler, heater, air compressor, air dryer, cooling tower system, water facilities such as softener and demineralizer, and chiller Hydraulic pump, pelletizer, screener, blower, rubber grinder, booster pump, injection and centrifugal pump. Maintaining substation, control panel, fire alarm system, one emergency generating unit. In-charge in trouble shooting of instrument devices like temperature gauge, pressure gauge, pressure transmitter, level transmitter, level transmitter indicator, level controller, flow recorder transmitter, panel indicator, pneumatic valve.
Responsibilities: To ensure normal operating procedure of all equipments and to avoid downtime of production.
Skills Preview:Knowledgeable in MS Word, Excel, Data base and Power point.
Studies Conducted:
October 1999Internal Quality Auditor Training Course (Management)
Joint Accreditation Society of Australia & New Zealand
(JAS-ANZ) Abu-Dhabi, UAE
August 1998PC Assembly, Troubleshooting, Upgrading and Configuration
Galaxy Computer, Abu-dhabi, UAE
October 1991Programmable Logic Controllers (PLC)
Industrial Controls-72 Hrs.
Meralco Foundation Institute, Manila, Philippines
June 1988Electrical System Design
United Professional Review Center, Manila, Philippines
Seminars Attended:
November 2008 OSHA 30 Hour Construction Certificate SN. 2352774
November 2006Enabling Certificate UTE C18-510 05, AREVA T & D
AREVA T & D, Dhaid, Sharjah, UAE
August 2001Safety Training, ABB (GUP Project)
Ruwais Refinery, Abu-dhabi, UAE
February 1998Basic Automotive Fundamentals
Abu-dhabi, UAE
September 1991Personal Enhancement Seminar
Entrepreneural Appreciation, Philippines
May 1985Commercial and Technical Policies and Services
Manila Electric Company, (Meralco) , Philippines
August 1977Industrial Fire Brigade Training,1977
Philippine Fire Protection Association, Philippines
December 1976Fire Fighting Technique, 1976
Petrochem Fire Bregades, Philippines
Educational Achievements:
1980-1985 (College): Bachelor of Science in Electrical Engineering (BSEE Graduated)
FEATI UNIVERSITY
Sta. Cruz, Manila, Philippines
References:
1. Mr. Mike Oliver National Railway Equipment Co., Mount Vernon, IL. USA
Electrical Supervisor Tel.(618)2426590
2. Engr. Arturo Tolentino Danway Mechanical and Electrical Engineering Co., Dubai, UAE
Project Manager Tell. +97104-2620356
3.Mr. Herve Venture AREVA T & D, Dubai, UAE
Site Manager Tell. +97104-33633084
STATUS : Green Card Holder allowed to work anywhere with Valid
Driver Licensed.
Respectfully Submitted:
Anacleto C. Cortez
RESUME
ANACLETO CAYA CORTEZ
4214 Valley forge Rd., Chesterfields Apt. D
Mt. Vernon, IL. 62864, USA
Res. 618-2441098/ Cell Ph. 618-2314936
Email: clefecor[at]yahoo.com
POSITION APPLIED FOR: Commercial Electrician
PROFESSIONAL PROFILE:
Experienced in Electrical Construction, Installation activities, of a High Voltage GIS Substations, and Large Power plant project. Experienced in the construction and design of a high rise and commercial building project. Twelve solid years experienced in the construction projects.
Experienced in the operation and maintenance for 11 years of a large power plant, high voltage substations, Oil and Gas refinery and petrochemical plant.
Can manage the project to a day to day work schedule activities and familiar with International management. Always adhere to company policies and familiar with ISO : 9002, IS:14002
Highly motivated individual, effective personable team player and goal driven and dedicated to work, excellent interpersonal skills and computer Literate.
Direct report to the Project Manager and / or to Erection Manager to submit reports and to received further instruction and follow the work program of the management.
OHSA 30 hour Occupational Safety and Health Training Course in Construction Safety Health.
PROFESSIONAL ACHIEVEMENTS:
March 07 to date National Railway Equipment Co., Mount Vernon, IL., 62864, USA
Position: Electrical Technician- Locomotive
Location: 1100 Shawnee Rd., Mount Vernon, IL.
Duties: To install and cable termination of all electrical components related to locomotive are Gen-sets, Inverter, Compressor, Blower, UPS, Airbrake, Choppers, Contactor, Bus bar, Battery cell and Traction motor. Installation and wiring of Lighting, E-bell, Horn, fuel gauge, fuel cut out, blow down, air conditioning, and other related electrical components. Lay down of power and control cable and termination, lay down two to three board, MU wire, MU to five board, Testing and high pot test.
Responsibility: To ensure that all electrical components are properly installed to the highest possible to the electrical standard.
April 06 to Nov.06 DANWAY Electrical & Mechanical Engineering Co., Dubai, UAE
Position: Project Engineer- Electrical
Location: 132KV GIS Substation-Dubai, UAE
Duties: Designed and Estimate the cable routing of power and control cable and termination accessories. Designed and estimate the cable ladder layout. Supervised the installation of earthing Grid conductor and internal earthing conductor network; erection of (3) three 500 MVA earthing transformer, erection of (3) three capacitor bank and cable termination, lay-down of power and control cable, installation of lighting and small power, installation of lightning protection of the substation. Manage and control jobsite the staffing and cost labor contract, equipments, materials and services. Implement
Safety programs and monitor ISO standards.
Responsibility: Direct report to the Operation Manager/ Project Manager the progress and the work program.
Aug. 05 to Mar. 06 AREVA (ALSTOM) Transmission & Distribution, Dubai, UAE
Position: Erection Supervisor -Electrical
Location: 400/220KV GIS Substation- Sharjah, UAE
Duties: Supervised the installation of 400KV and 220KV, GIS Substation; Gas Insulated Switchgear (GIS), Gas Insulated Bus Bar(GIB), Current Transformer (CT), Voltage Transformer (VT), and Monitoring devices; Installation of relay panel, Substation Control Monitoring System (SCMS), Fault Monitoring System (FMS), Interface Panel, Telecommunication, Low Voltage AC (LVAC), Uninterruptible Power Supply (UPS), installation of Battery charger, refilling of water solution and charging 110 and 48volts battery; Installation of cable tray, Lay-down of power and and control cable, testing of power cable, cable glanding, dressing and termination of power and control cable; Installation of earthing both internal and external network, installation of transformer. Installation of surge arrester, and bushing for 400KV and 200KV and overhead line tower. Control jobsite, contract labor, equipments materials and services and ensure that project operations are within budget. Strict implementation of safety program.
Responsibility: Always report to Project Manager and / or Erection Manager and support the Work Program of the Management.
Mar.01 to Jul.05 TARGET ENGG CONST. ME & I DIVISION, Abu-Dhabi, UAE
Projects Undertaken: As Construction Site Supervisor for GIS Substations
1. Worked to the Project 400KV and 132 KV S/S, E48, ADWEA/ TOSHIBA TMT and D, Abu-Dhabi, U.A.E.
2. Worked to the project 400/220/ 33/ 11KV S/S, Al ain South West, ADWEA,VATECH, Abu-dhabi, UAE
3. Worked to the project SVC 220KV S/S Al-ain, South West, ADWEA/ TOSHIBA TPK, Abu-Dhabi, U.A.E.
4. Worked to the project Mussafah Palace (Private Department), Abu-dhabi, UAE
5. Worked to the project Guzhlan Island Palace (Private Department), Abu-dhabi, UAE
6. Worked to the project Globe-19 Rest house (private Department) Dubai, UAE
7. Worked to the project 132/33/11KV S/S Conference Palace, ADWEA/ VATECH, Abu-dhabi, UAE
8. Worked to the project 400KV S/S Al Taweelah, ADWEA/ HTACHI SUMITOMO, Abu-dhabi, UAE
Duties: Supervised the installation of 400KV, 220KV, 132KV, 33KV, and 11KV Grid station; Gas Insulated Switchgear (GIS), Gas Insulated Bus Bar, Current Transformer (CT), Voltage Transformer (VT), and Monitoring devices; Installation of relay panel, Substation Control Monitoring System (SCMS), Fault Monitoring System (FMS), Interface Panel, Telecom, Low Voltage AC (LVAC), Uninterruptible Power Supply (UPS), installation of Battery racks, refilling of water solution and charging 110 and 48volts DC; Installation of cable tray, Lay-down of power and control cable, testing of power cable, dressing and termination of power and control cable; Installation of earthing both internal and external network, installation of transformer accessories, vacuuming of transformer, oil filtering and oil filling, Installation of surge arrester and transformer. Supervised the Installation of 2 units 220KV Static Voltage Compensator (SVC), Substation and 4 units Reactor and. Control jobsite, coordinated project schedule, contract labor, staffing, equipments, materials and services. Always adhere to contract and technical specification to the highest electrical standard practice and always turnover project on time; reviewed and coordinated for the approval of project to be implemented.
Responsibility: Always report to Project Manager and / or Erection Manager and support the Work Program of the Management.
Nov.99 to Feb. 01 ABB SADILMI S.P.A. (ALSTOM), Abu Dhabi, U. A. E.
Position: Commissioning Supervisor - Electrical
Location: General Utilities Expansion Project, (ADNOC) Ruwais
Duties: Supervised for the following activities, taking the insulation resistance of the power cable of 33kv and 11kv and conducting high pot test including bus bar. Testing and commissioning of Switchgear and breaker, testing various alarms and trips of a transformer such as Tap-changer, oil pressure, differential transformer protection, bucholtz tank trip, Excess temperature oil trip, excess temperature wind trip and tank pressure relief device. Responsible of taking the current transformer (CT) polarity and CT ratio, of taking relay setting ,of taking the phase sequence and of wire loop checking and metering devices. Responsible of electrical modification, battery charging and discharging.
Responsibilities: responsible in carrying out all electrical construction controls and checks in respect to the implementation of electrical standard procedure.
May92 to Nov.99 KUNAIBY ENGINEERING SERVICES, Abu-Dhabi, U.A.E.
Worked with :
ANSALDO ENERGIA SPA, Abu-Dhabi, U.A.E.
ABB HASELSCROFT, Abu-Dhabi, U.A.E.
BABCOCK DEUCHE , Abu-Dhabi, U.A.E.
ADWEA , Abu-Dhabi, UAE
Position: Maintenance Foreman-Electrical
Location: Abu-Dhabi Water and Electricity Power Plant with Desalination
Duties-Supervised the overhauling, Operation and Maintenance of Gas and Steam Turbines, Boilers Desalination, Pumps, Motors, Transformers, MCC, Relay and UPS. Overhauling of the 4units 165MW gas turbine and 10units 65 MW Steam Turbine. Isolated power supply to the whole system of metering and protection devices during the shutdown. Checking carbon brushes of 165MW Generator and Exciter of and switchgears . Worked with ADWEA Engineer in Operation and Maintenance, trouble shooting of protective devices and relays of gas and steam Turbine, boiler, motor, transformer, motor operated valve and other related equipments. Testing of protection systems of power station and power transmission System. Maintenance of high voltage switching equipments, circuit breakers, Distribution board, transformers and modules. Preventive maintenance of all Electrical equipments, assembly and disassembly of motor and bearing replacement, and re-greasing of motors. Supervised the seventy eight staff with different skill, electrical, mechanical and instrumentation technician.
Responsibilities: To ensure that all electrical installation activities shall conform to the electrical standard and carry out all electrical preventive and predictive maintenance as per electrical specification.
Aug.1988-Aug. 1990 KELLOGG PLANT SERVICES, FAHAHEEL, Kuwait
Position: Maintenance Technician- Electrical
Location: Mina Abdullah Refinery, Kuwait
Duties-To carry out testing and commissioning activities of newly build refinery cooker train 1and train 2 preventive and predictive breakdown maintenance in all industrial electrical machine within the area. Includes 25 tons monorail hoist, 32 units motorize operated valves (MOV) and 4 units 3.3 KV high tension motor and 120 units 440V motors, air drier, vacuum pumps, booster pump, transformers, emergency generator, switchgears, transformer, breakers of motor control center (MCC), un-interruptible power supply (UPS) periodic reading on battery. Calibration of system protection and metering devices. Trouble shooting on switchgear, loop checking of lighting and power supply. Safety strictly observed during shutdown and on plant operation and maintenance may it be hot work or cold work.
Responsibilities: To ensure that all electrical installation activities shall conform to the technical specification and contract documents.
Nov.1985-Jul.1988 L.C. CORTEZ CONSTRUCTION, Philippines
Position: Site Engineer
Location: Bicol Region
Duties: Managing and preparation of project man-hours estimates, project study, project proposals, design scope of work, construction scope of work, tender documents, project activities and schedules required on various projects. Knowledge of computer being utilized for various projects for management, Engineering calculation, Projects support activities. Supervised construction project of commercial buildings, like Bank, Hospital, High rise buildings, Schools and industrial buildings. Designed and estimates electrical power of the buildings according to specification. Supervision of electrical installation, includes from service drop to service entrance of the building. Layout of rigid conduit, surface raceways, wire-ways, bush-ways, power outlet, junction boxes, switches, fittings, switchboards and panel boards. Supervised installations of fire alarm s, smoke and gas detector and other electrical devices.
Responsibilities- To ensure that all electrical activities conform to the technical specification and to contract documents.
Sept. 1978-Oct. 1979 ERECTORS CONSTRUCTION INC., Philippines
Position: Lead man- Building Electrician
Location: Buraida Sports Complex Project ( Saudi Arabia )
Duties: Installation of rigid steel conduits, power outlets, switches, junction boxes and fittings. Lay-down of power cable from transformer from substation to primary supply which is 4 units, 11 KV transformer. Termination of service drop and also the service entrance. Installation of smoke detector, lighting fixture, power system outlet and other electrical equipments.
Responsibilities: to ensure that all electrical installation are in the right place.
Dec.1973-Sept.1978 PETROCHEMICAL PRODUCTS INC., Philippines
Position: Maintenance Lead man - Electrician
Location: Rosario, Cavite
Duties: To carry out the preventive and predictive maintenance of all electrical equipments. Switchgear commissioning, disassembly and re-assembly of circuit breaker, contactors and relays, termination of cable and testing of power supply for motor. Overhauling of motor, removal and replacement of bearing and checking winding continuity before assembly, troubleshoot lighting and power supply fault finding. In-charge of various utilities equipments such as steam boiler, heater, air compressor, air dryer, cooling tower system, water facilities such as softener and demineralizer, and chiller Hydraulic pump, pelletizer, screener, blower, rubber grinder, booster pump, injection and centrifugal pump. Maintaining substation, control panel, fire alarm system, one emergency generating unit. In-charge in trouble shooting of instrument devices like temperature gauge, pressure gauge, pressure transmitter, level transmitter, level transmitter indicator, level controller, flow recorder transmitter, panel indicator, pneumatic valve.
Responsibilities: To ensure normal operating procedure of all equipments and to avoid downtime of production.
Skills Preview:Knowledgeable in MS Word, Excel, Data base and Power point.
Studies Conducted:
October 1999Internal Quality Auditor Training Course (Management)
Joint Accreditation Society of Australia & New Zealand
(JAS-ANZ) Abu-Dhabi, UAE
August 1998PC Assembly, Troubleshooting, Upgrading and Configuration
Galaxy Computer, Abu-dhabi, UAE
October 1991Programmable Logic Controllers (PLC)
Industrial Controls-72 Hrs.
Meralco Foundation Institute, Manila, Philippines
June 1988Electrical System Design
United Professional Review Center, Manila, Philippines
Seminars Attended:
November 2008 OSHA 30 Hour Construction Certificate SN. 2352774
November 2006Enabling Certificate UTE C18-510 05, AREVA T & D
AREVA T & D, Dhaid, Sharjah, UAE
August 2001Safety Training, ABB (GUP Project)
Ruwais Refinery, Abu-dhabi, UAE
February 1998Basic Automotive Fundamentals
Abu-dhabi, UAE
September 1991Personal Enhancement Seminar
Entrepreneural Appreciation, Philippines
May 1985Commercial and Technical Policies and Services
Manila Electric Company, (Meralco) , Philippines
August 1977Industrial Fire Brigade Training,1977
Philippine Fire Protection Association, Philippines
December 1976Fire Fighting Technique, 1976
Petrochem Fire Bregades, Philippines
Educational Achievements:
1980-1985 (College): Bachelor of Science in Electrical Engineering (BSEE Graduated)
FEATI UNIVERSITY
Sta. Cruz, Manila, Philippines
References:
1. Mr. Mike Oliver National Railway Equipment Co., Mount Vernon, IL. USA
Electrical Supervisor Tel.(618)2426590
2. Engr. Arturo Tolentino Danway Mechanical and Electrical Engineering Co., Dubai, UAE
Project Manager Tell. +97104-2620356
3.Mr. Herve Venture AREVA T & D, Dubai, UAE
Site Manager Tell. +97104-33633084
STATUS : Green Card Holder allowed to work anywhere with Valid
Driver Licensed.
Respectfully Submitted:
Anacleto C. Cortez
RESUME
ANACLETO CAYA CORTEZ
4214 Valley forge Rd., Chesterfields Apt. D
Mt. Vernon, IL. 62864, USA
Res. 618-2441098/ Cell Ph. 618-2314936
Email: clefecor[at]yahoo.com
POSITION APPLIED FOR: Commercial Electrician
PROFESSIONAL PROFILE:
Experienced in Electrical Construction, Installation activities, of a High Voltage GIS Substations, and Large Power plant project. Experienced in the construction and design of a high rise and commercial building project. Twelve solid years experienced in the construction projects.
Experienced in the operation and maintenance for 11 years of a large power plant, high voltage substations, Oil and Gas refinery and petrochemical plant.
Can manage the project to a day to day work schedule activities and familiar with International management. Always adhere to company policies and familiar with ISO : 9002, IS:14002
Highly motivated individual, effective personable team player and goal driven and dedicated to work, excellent interpersonal skills and computer Literate.
Direct report to the Project Manager and / or to Erection Manager to submit reports and to received further instruction and follow the work program of the management.
OHSA 30 hour Occupational Safety and Health Training Course in Construction Safety Health.
PROFESSIONAL ACHIEVEMENTS:
March 07 to date National Railway Equipment Co., Mount Vernon, IL., 62864, USA
Position: Electrical Technician- Locomotive
Location: 1100 Shawnee Rd., Mount Vernon, IL.
Duties: To install and cable termination of all electrical components related to locomotive are Gen-sets, Inverter, Compressor, Blower, UPS, Airbrake, Choppers, Contactor, Bus bar, Battery cell and Traction motor. Installation and wiring of Lighting, E-bell, Horn, fuel gauge, fuel cut out, blow down, air conditioning, and other related electrical components. Lay down of power and control cable and termination, lay down two to three board, MU wire, MU to five board, Testing and high pot test.
Responsibility: To ensure that all electrical components are properly installed to the highest possible to the electrical standard.
April 06 to Nov.06 DANWAY Electrical & Mechanical Engineering Co., Dubai, UAE
Position: Project Engineer- Electrical
Location: 132KV GIS Substation-Dubai, UAE
Duties: Designed and Estimate the cable routing of power and control cable and termination accessories. Designed and estimate the cable ladder layout. Supervised the installation of earthing Grid conductor and internal earthing conductor network; erection of (3) three 500 MVA earthing transformer, erection of (3) three capacitor bank and cable termination, lay-down of power and control cable, installation of lighting and small power, installation of lightning protection of the substation. Manage and control jobsite the staffing and cost labor contract, equipments, materials and services. Implement
Safety programs and monitor ISO standards.
Responsibility: Direct report to the Operation Manager/ Project Manager the progress and the work program.
Aug. 05 to Mar. 06 AREVA (ALSTOM) Transmission & Distribution, Dubai, UAE
Position: Erection Supervisor -Electrical
Location: 400/220KV GIS Substation- Sharjah, UAE
Duties: Supervised the installation of 400KV and 220KV, GIS Substation; Gas Insulated Switchgear (GIS), Gas Insulated Bus Bar(GIB), Current Transformer (CT), Voltage Transformer (VT), and Monitoring devices; Installation of relay panel, Substation Control Monitoring System (SCMS), Fault Monitoring System (FMS), Interface Panel, Telecommunication, Low Voltage AC (LVAC), Uninterruptible Power Supply (UPS), installation of Battery charger, refilling of water solution and charging 110 and 48volts battery; Installation of cable tray, Lay-down of power and and control cable, testing of power cable, cable glanding, dressing and termination of power and control cable; Installation of earthing both internal and external network, installation of transformer. Installation of surge arrester, and bushing for 400KV and 200KV and overhead line tower. Control jobsite, contract labor, equipments materials and services and ensure that project operations are within budget. Strict implementation of safety program.
Responsibility: Always report to Project Manager and / or Erection Manager and support the Work Program of the Management.
Mar.01 to Jul.05 TARGET ENGG CONST. ME & I DIVISION, Abu-Dhabi, UAE
Projects Undertaken: As Construction Site Supervisor for GIS Substations
1. Worked to the Project 400KV and 132 KV S/S, E48, ADWEA/ TOSHIBA TMT and D, Abu-Dhabi, U.A.E.
2. Worked to the project 400/220/ 33/ 11KV S/S, Al ain South West, ADWEA,VATECH, Abu-dhabi, UAE
3. Worked to the project SVC 220KV S/S Al-ain, South West, ADWEA/ TOSHIBA TPK, Abu-Dhabi, U.A.E.
4. Worked to the project Mussafah Palace (Private Department), Abu-dhabi, UAE
5. Worked to the project Guzhlan Island Palace (Private Department), Abu-dhabi, UAE
6. Worked to the project Globe-19 Rest house (private Department) Dubai, UAE
7. Worked to the project 132/33/11KV S/S Conference Palace, ADWEA/ VATECH, Abu-dhabi, UAE
8. Worked to the project 400KV S/S Al Taweelah, ADWEA/ HTACHI SUMITOMO, Abu-dhabi, UAE
Duties: Supervised the installation of 400KV, 220KV, 132KV, 33KV, and 11KV Grid station; Gas Insulated Switchgear (GIS), Gas Insulated Bus Bar, Current Transformer (CT), Voltage Transformer (VT), and Monitoring devices; Installation of relay panel, Substation Control Monitoring System (SCMS), Fault Monitoring System (FMS), Interface Panel, Telecom, Low Voltage AC (LVAC), Uninterruptible Power Supply (UPS), installation of Battery racks, refilling of water solution and charging 110 and 48volts DC; Installation of cable tray, Lay-down of power and control cable, testing of power cable, dressing and termination of power and control cable; Installation of earthing both internal and external network, installation of transformer accessories, vacuuming of transformer, oil filtering and oil filling, Installation of surge arrester and transformer. Supervised the Installation of 2 units 220KV Static Voltage Compensator (SVC), Substation and 4 units Reactor and. Control jobsite, coordinated project schedule, contract labor, staffing, equipments, materials and services. Always adhere to contract and technical specification to the highest electrical standard practice and always turnover project on time; reviewed and coordinated for the approval of project to be implemented.
Responsibility: Always report to Project Manager and / or Erection Manager and support the Work Program of the Management.
Nov.99 to Feb. 01 ABB SADILMI S.P.A. (ALSTOM), Abu Dhabi, U. A. E.
Position: Commissioning Supervisor - Electrical
Location: General Utilities Expansion Project, (ADNOC) Ruwais
Duties: Supervised for the following activities, taking the insulation resistance of the power cable of 33kv and 11kv and conducting high pot test including bus bar. Testing and commissioning of Switchgear and breaker, testing various alarms and trips of a transformer such as Tap-changer, oil pressure, differential transformer protection, bucholtz tank trip, Excess temperature oil trip, excess temperature wind trip and tank pressure relief device. Responsible of taking the current transformer (CT) polarity and CT ratio, of taking relay setting ,of taking the phase sequence and of wire loop checking and metering devices. Responsible of electrical modification, battery charging and discharging.
Responsibilities: responsible in carrying out all electrical construction controls and checks in respect to the implementation of electrical standard procedure.
May92 to Nov.99 KUNAIBY ENGINEERING SERVICES, Abu-Dhabi, U.A.E.
Worked with :
ANSALDO ENERGIA SPA, Abu-Dhabi, U.A.E.
ABB HASELSCROFT, Abu-Dhabi, U.A.E.
BABCOCK DEUCHE , Abu-Dhabi, U.A.E.
ADWEA , Abu-Dhabi, UAE
Position: Maintenance Foreman-Electrical
Location: Abu-Dhabi Water and Electricity Power Plant with Desalination
Duties-Supervised the overhauling, Operation and Maintenance of Gas and Steam Turbines, Boilers Desalination, Pumps, Motors, Transformers, MCC, Relay and UPS. Overhauling of the 4units 165MW gas turbine and 10units 65 MW Steam Turbine. Isolated power supply to the whole system of metering and protection devices during the shutdown. Checking carbon brushes of 165MW Generator and Exciter of and switchgears . Worked with ADWEA Engineer in Operation and Maintenance, trouble shooting of protective devices and relays of gas and steam Turbine, boiler, motor, transformer, motor operated valve and other related equipments. Testing of protection systems of power station and power transmission System. Maintenance of high voltage switching equipments, circuit breakers, Distribution board, transformers and modules. Preventive maintenance of all Electrical equipments, assembly and disassembly of motor and bearing replacement, and re-greasing of motors. Supervised the seventy eight staff with different skill, electrical, mechanical and instrumentation technician.
Responsibilities: To ensure that all electrical installation activities shall conform to the electrical standard and carry out all electrical preventive and predictive maintenance as per electrical specification.
Aug.1988-Aug. 1990 KELLOGG PLANT SERVICES, FAHAHEEL, Kuwait
Position: Maintenance Technician- Electrical
Location: Mina Abdullah Refinery, Kuwait
Duties-To carry out testing and commissioning activities of newly build refinery cooker train 1and train 2 preventive and predictive breakdown maintenance in all industrial electrical machine within the area. Includes 25 tons monorail hoist, 32 units motorize operated valves (MOV) and 4 units 3.3 KV high tension motor and 120 units 440V motors, air drier, vacuum pumps, booster pump, transformers, emergency generator, switchgears, transformer, breakers of motor control center (MCC), un-interruptible power supply (UPS) periodic reading on battery. Calibration of system protection and metering devices. Trouble shooting on switchgear, loop checking of lighting and power supply. Safety strictly observed during shutdown and on plant operation and maintenance may it be hot work or cold work.
Responsibilities: To ensure that all electrical installation activities shall conform to the technical specification and contract documents.
Nov.1985-Jul.1988 L.C. CORTEZ CONSTRUCTION, Philippines
Position: Site Engineer
Location: Bicol Region
Duties: Managing and preparation of project man-hours estimates, project study, project proposals, design scope of work, construction scope of work, tender documents, project activities and schedules required on various projects. Knowledge of computer being utilized for various projects for management, Engineering calculation, Projects support activities. Supervised construction project of commercial buildings, like Bank, Hospital, High rise buildings, Schools and industrial buildings. Designed and estimates electrical power of the buildings according to specification. Supervision of electrical installation, includes from service drop to service entrance of the building. Layout of rigid conduit, surface raceways, wire-ways, bush-ways, power outlet, junction boxes, switches, fittings, switchboards and panel boards. Supervised installations of fire alarm s, smoke and gas detector and other electrical devices.
Responsibilities- To ensure that all electrical activities conform to the technical specification and to contract documents.
Sept. 1978-Oct. 1979 ERECTORS CONSTRUCTION INC., Philippines
Position: Lead man- Building Electrician
Location: Buraida Sports Complex Project ( Saudi Arabia )
Duties: Installation of rigid steel conduits, power outlets, switches, junction boxes and fittings. Lay-down of power cable from transformer from substation to primary supply which is 4 units, 11 KV transformer. Termination of service drop and also the service entrance. Installation of smoke detector, lighting fixture, power system outlet and other electrical equipments.
Responsibilities: to ensure that all electrical installation are in the right place.
Dec.1973-Sept.1978 PETROCHEMICAL PRODUCTS INC., Philippines
Position: Maintenance Lead man - Electrician
Location: Rosario, Cavite
Duties: To carry out the preventive and predictive maintenance of all electrical equipments. Switchgear commissioning, disassembly and re-assembly of circuit breaker, contactors and relays, termination of cable and testing of power supply for motor. Overhauling of motor, removal and replacement of bearing and checking winding continuity before assembly, troubleshoot lighting
|
